Details
Product Features
A common output mode for industrial sensors is 4-20mA. This adapter lets you use 4-20mA sensors with a Phidgets Analog Input.
The 4-20mASensors can be connected to and powered by the provided terminals on the 4-20mA Adapter board. The 1132 will measure the current passing through the attached sensor and convert it to a voltage, where it can be displayed as a SensorValue by a Phidget Interface board.
The 4-20 mA Adapter board internally produces +15V from the Phidget InterfaceKit’s input analog voltages which is used to power the connected sensor, eliminating the need for an external power supply.
If the Adapter board is being used in very noisy environments, place a ferrite bead on the sensor current loop close to where it is attached to the 1132.
Product Specifications
Sensor Properties
Sensor Output Type | Non-Ratiometric |
Electrical Properties
Output Impedance | 1 kΩ |
Available External Voltage | 15 V DC |
Current Consumption Min | 1.8 mA |
Current Consumption (4mA Load) | 18.4 mA |
Current Consumption (22mA Load) | 130 mA |
Inrush Current Max (Hot Plug) | 160 mA |
Supply Voltage Min | 4.8 V DC |
Supply Voltage Max | 5.3 V DC |
Capacitive Load Max | 1.5 μF |
Measurement Error Max | ± 1.2 % |
Physical Properties
Recommended Wire Size | 12 - 24 AWG |
Operating Temperature Min | -40 °C |
Operating Temperature Max | 85 °C |
Comes packaged with
Enclosure
You can protect your board by using the 3826 - Acrylic Enclosure for the 1132 .
Resources
Additional Information
SKU | ES000064 |
---|---|
Manufacturer | Phidgets |