29:1 Metal Gearmotor 37Dx52L mm

Be the first to review this product

Availability: Out of stock

€24.95

Quick Overview

This 2.05" x 1.45" x 1.45" gearmotor is a powerful brushed DC motor with 29:1 metal gearbox intended for operation at 12 V. These units have a 0.61"-long, 6 mm-diameter D-shaped output shaft.

More Views

  • 29:1 Metal Gearmotor 37Dx52L mm
  • 29:1 Metal Gearmotor 37Dx52L mm
  • 29:1 Metal Gearmotor 37Dx52L mm

Details

This 2.05" x 1.45" x 1.45" gearmotor is a powerful brushed DC motor with 29:1 metal gearbox intended for operation at 12 V. These units have a 0.61"-long, 6 mm-diameter D-shaped output shaft.

Key specs at 12 V: 350 RPM and 300 mA free-run, 110 oz-in (8 kg-cm) and 5 A stall.

Gearmotor Dimensions:

The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm apart. You can use our custom 37D metal gearmotor bracket (shown in the left picture below) to mount the gearmotor to your project via these mounting holes and the screws that come with the bracket.

Gearmotor with bracket and hub.
Black Pololu 90×10mm wheel on a Pololu 37D mm metal gearmotor.

Please note that unlike our smaller metal gearmotors, these 37D mm gearmotors have output shafts with a diameter of 6 mm. The Pololu universal aluminum mounting hub for 6mm shafts can be used to mount our larger Pololu wheels (80mm- and 90mm-diameter) or custom wheels and mechanisms to the gearmotor’s output shaft (see the right picture above).

The picture below shows the dimensions (in mm) of the 37D mm line of gearmotors. The value of X is 22 mm for the 19:1 37Dx52L mm and 29:1 37Dx52L mm versions, 24 mm for the 50:1 37Dx54L mm and 67:1 37Dx54L mm versions, and 26.5 mm for the 100:1 37Dx57L mm and 131:1 37Dx57L mm versions.

37D mm metal gearmotor dimensions (units in mm).

Warning: Do not screw too far into the mounting holes as the screws can hit the gears. We recommend screwing no further than 3mm (1/8") into the screw hole.

The operational specs listed in the table below were measured at 6 V. At 12 V, the no-load RPM, stall current, and stall torque will all be approximately twice their 6V values. To see the motor specs for 12V operation, please see the short description at the top of this page or this product’s specification tab.

Dimensions

Size: 37D x 52L mm
Weight: 6.7 oz
Shaft diameter: 6 mm

General specifications

Gear ratio: 29:1
Free-run speed @ 6V: 175 rpm1
Free-run current @ 6V: 250 mA1
Stall current @ 6V: 2500 mA1
Stall torque @ 6V: 55 oz·in1
Free-run speed @ 12V: 350 rpm
Free-run current @ 12V: 300 mA
Stall current @ 12V: 5000 mA
Stall torque @ 12V: 110 oz·in

Notes:

1
This motor will run at 6 V but is intended for operation at 12 V.

Additional Information

SKU ES000266
Manufacturer Pololu

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.