3323_0 - 35STH36 NEMA 14 Bipolar Gearless Stepper

Be the first to review this product

Availability: In stock


Quick Overview

This bipolar stepper with rear shaft has a 1.8° step angle and 1.2 kg·cm of torque at low speeds.

More Views

  • 3323_0 - 35STH36 NEMA 14 Bipolar Gearless Stepper


Product Features

This bipolar stepper with rear shaft has a 1.8° step angle and 1.2 kg·cm of torque at low speeds.
Product Description

This NEMA-14 motor generates 1.4 Kg-cm of holding torque at 1 Amp. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler.

When connected to a 1067 - PhidgetStepper Bipolar HC, the 3323 has a maximum speed of approximately 2340 RPM at zero load.

Motor Controller and Encoder

The 3323 stepper motor connects to a bipolar motor controller such as the 1067 - PhidgetStepper Bipolar HC.

The following table shows how to connect the motor wires to the board connectors to produce a clockwise rotation in the stepper motor when increasing position. To wire for counter-clockwise rotation when increasing position, reverse the red and blue wires.

Wire Color Black Green Red Blue
Board Connector A B C D

Note: Make sure to unplug the power cord from the motor controller before switching wires around.

The rear shaft of this motor can be equipped with the HKT22 Optical Encoderfor applications where you need to keep track of the exact position, velocity, or acceleration of the motor.

Product Specifications

Motor Properties

Motor Type Bipolar Stepper
Manufacturer Part Number 35STH36-1004B
Step Angle 1.8°
Step Accuracy ± 5 %
Holding Torque 1.4 kg·cm
Rated Torque 1.2 kg·cm
Maximum Speed (w/1067 Motor Controller) 2340 RPM
Acceleration at Max Speed
(w/1067 Motor Controller)
1E+06 1/16 steps/sec²

Electrical Properties

Recommended Voltage 12 V DC
Rated Current 1 A
Coil Resistance 2.7 Ω

Physical Properties

Shaft Diameter 5 mm
Rear Shaft Diameter 3.9 mm
Mounting Plate Size NEMA - 14
Weight 200 g
Number of Leads 4
Wire Length 300 mm


warning Connecting the motor directly to a power supply will destroy the motor and void the warranty. If you want to check your motor make sure it is connected to a constant current / chopper drive controller.


Additional Information

SKU ES001656
Manufacturer Phidgets

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.