3950_0 - DC Solid State Relay - 30V 50A

Be the first to review this product

Availability: In stock

€37.50
OR

Quick Overview

The 3950 DC Solid State Relay can be used to switch loads of up to 50A at 30VDC using the digital output from a 1012 - PhidgetInterfaceKit 0/16/16.
3950_0 - DC Solid State Relay - 30V 50A

More Views

  • 3950_0 - DC Solid State Relay - 30V 50A

Details

Product Features


This SSR switches up to 30VDC/50A and connects to a PhidgetInterfaceKit 0/16/16.
 
Product Description

The 3950 DC Solid State Relay can be used to switch loads of up to 50A at 30VDC using the digital output from a 1012 - PhidgetInterfaceKit 0/16/16. The Relay comes with an optional protective cover to protect people from touching the exposed high power wires, and a diode to protect your SSR from harmful transients. All wires connect to this relay by screw terminals. If you are switching a high power load or find the relay is getting hot, please consider a heat sink. Heat sinks 3955 and 3956 are designed for use with this relay.


Product Specifications


Electrical Properties

Relay Output Type MOSFET
Isolation Method Photoelectric
Dielectric Strength 2.5 kV AC
Control Voltage Min 3 V DC
Control Voltage Max 32 V DC
Load Voltage Max (DC) 30 V DC
Load Current Min 20 mA
Load Current Max (DC) 18 A
Load Current Max (With 3955 Heatsink) 50 A
Load Current Max (With 3956 Heatsink) 50 A
Load Surge Current 120 A
Turn-on Time Max 1 ms
Turn-off Time Max 0.5 ms

Physical Properties

Length 58 mm
Width 45 mm
Height 25 mm
Operating Temperature Min -30 °C
Operating Temperature Max 80 °C

Other Properties

Manufacturer Part Number HFS33/D-30D50M

Have a look at the Data Sheet for a complete set of specifications.

Warnings


 
  1. When choosing a SSR, check the actual load current and the working ambient temperature. Refer to the characteristic curve in the Data Sheet and select the proper heat sink if required.
  2. Use the heat transfer pad between the SSR and the heat sink. Failure to do so can cause overheating and could damage the relay.
  3. Make sure that the SSR terminal screws are tight. If the screws are not tight, the SSR will get damaged by heat generated when the power is ON. Check the Data Sheet for recommended tightened torque.
  4. When an SSR fails, it most often fails permanently closed - leaving your load powered, and possibly creating a fire or safety hazard.
  5. You can use a fuse to protect your circuit from wiring mistakes and accidental short-circuits.
  6. Make sure that you use the relay within the product specifications.
Comes Packaged with

Accessories
  • A Protective Relay Cover
  • A Heat Transfer Pad
  • A Diode


Heat Sinks

Have a look at the relay's characteristic curve in the Data Sheet to decide if you need a heat sink. Without a heat sink, the maximum current that can be handled by this relay is 18A up to an ambient temperature of 40°C.

To switch currents between 18 and 50A, you have to use the 3955 - Heat Sink.



Resources




Connection


This relay connects to the 1012 - PhidgetInterfaceKit 0/16/16.
Just connect the positive control terminal of the SSR to the +5V terminal on the 1012, and connect the negative terminal to an open collector digital output on the 1012.
diagram

Additional Information

SKU ES000252
Manufacturer Phidgets

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.