3509_1 - CE-VZ02-32MS1-0.5 DC Voltage Sensor 0-200V

Be the first to review this product

Availability: In stock

€139.00
OR

Quick Overview

This sensor measures up to 200 volts DC and connects to an analog input.
3509_1 - CE-VZ02-32MS1-0.5 DC Voltage Sensor 0-200V

More Views

  • 3509_1 - CE-VZ02-32MS1-0.5 DC Voltage Sensor 0-200V
  • 3509_1 - CE-VZ02-32MS1-0.5 DC Voltage Sensor 0-200V
  • 3509_1 - CE-VZ02-32MS1-0.5 DC Voltage Sensor 0-200V
  • 3509_1 - CE-VZ02-32MS1-0.5 DC Voltage Sensor 0-200V

Details

Product Features


This sensor measures up to 200 volts DC and connects to an analog input.
 
Product Description

This DC Voltage sensor measures DC voltage up to 200V. Powered by an external 12VDC power supply, the DC Voltage Sensor provides a 0 to 5VDC analog signal that is linearly proportional to the voltage measured at the terminal blocks.

The DC Voltage Sensor can easily be mounted using the screw holes, or on a 35mm wide DIN rail for quick installation. The terminal blocks accommodate conductors of up to AWG #16.

The voltage sensor connects to an analog input on Phidgets I/O boards. The formula to translate the SensorValue into Voltage is:

V = SensorValue * 0.2


Product Specifications


Sensor Properties

Sensor Type Voltage (DC)
Sensor Output Type Non-Ratiometric
Input Voltage Min (DC) 0 V DC
Input Voltage Max (DC) 200 V DC
Measurement Error Max 0.5 %
Sensor Response Time Max 400 ms

Electrical Properties

Supply Voltage Min 12 V DC
Supply Voltage Max 12 V DC
Current Consumption Max 4.2 mA
Isolation Voltage (DC) 2.5 kV DC
Output Voltage Min 0 V DC
Output Voltage Max 5 V DC

Physical Properties

Recommended Wire Size 12 - 24 AWG
Operating Temperature Min 0 °C
Operating Temperature Max 50 °C


Recommended Power Supplies


In order to use one of these power supplies with this sensor, you must cut the small plug from the end of the power supply and connect the wires directly into the sensor. You can also use a 3031 – Female Pigtail.



Resources


Connection

This sensor connects to any device with an Analog Input.

You can use the 1144 - 12V Sensor Adapter to connect the voltage sensor to an analog input as pictured below.

Connecting
  • Connect the +12V terminal on the 1144 to the voltage sensor terminal 5 (+12V).
  • Connect the GND terminal on the 1144 to the voltage sensor terminal 6 (-).
  • Connect the ANLG terminal on the 1144 to the voltage sensor terminal 8 (+).

Alternatively, you can use the 3002 - Sensor Cable 60cm or the 3004 - Sensor Cable 350cm to connect the DC Voltage Sensor to your Phidget. Just snip off the connector from one end of the sensor cable and connect the wires as described below. You can also use a 3031 – Female Pigtail if you don't want to cut the barrel jack off of the power supply.

  • Connect the Power Supply +12V wire (the wire with the white line) to the voltage sensor terminal 5 (+12V).
  • Connect the Power Supply Ground wire and the Analog Sensor Cable Black wire to the voltage sensor terminal 6 (-).
  • Connect the sensor cable white wire to the voltage sensor terminal 8 (+).
  • Connect the DC power and ground wires to the voltage sensor terminals 1 (IN) and 3 (IN).
Connecting
Connecting

For boards that have power input, such as the 1019 or the 1073, if the supplied power is 12V, then the + terminal block on the Phidget Board can be connected to the voltage sensor terminal 5 (+12V), and the G terminal block on the Phidget Board can be connected to the sensor terminal 6 (-).

Additional Information

SKU ES001695
Manufacturer Phidgets

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.