3523_0 - Lanbao CR18SCN08DNO Capacitive Proximity Sensor - 8mm

Be the first to review this product

Availability: In stock

€45.00
OR

Quick Overview

3523 is used for non-contact detection of metallic / non-metallic objects such as liquid, powder and granular materials; it detect through glass plastic
3523_0 - Lanbao CR18SCN08DNO Capacitive Proximity Sensor - 8mm

More Views

  • 3523_0 - Lanbao CR18SCN08DNO Capacitive Proximity Sensor - 8mm

Details

Product Features


This capacitive sensor can detect metals and some other materials within 8mm and behaves like a switch that connects to a digital input.
 
Product Description

This capacitive proximity sensor is used for non-contact detection of metallic and non-metallic objects such as liquid, powder and granular materials; it can also detect materials through glass or plastic walls.

Note that the standard detecting distance is based on a standard shape approaching the sensor in a standard way. The real detecting distance will vary depending on the shape, thickness and type of material being detected.

You can adjust the operating distance by turning a screw placed on the side of the sensor.



Product Specifications


Sensor Properties

Detecting Distance Max 8 mm
Setting Distance Max 6.4 mm
Sensor Type Proximity (Capacitive)
Sensor Output Switch Type Normally Open
Detection Hysteresis Min 3 %
Detection Hysteresis Max 20 %
Sensor Response Time Max 20 ms

Electrical Properties

Supply Voltage Min 10 V DC
Supply Voltage Max 30 V DC
Current Consumption Max 15 mA
Protection Circuitry Reverse Polarity, Surge, Overload and Short-Circuit

Physical Properties

Cable Length 2 m
Material PBT
Operating Indicator Yellow LED
IP Rating IP67
Length 78 mm
Diameter 18 mm
Operating Temperature Min -25 °C
Operating Temperature Max 70 °C
Operating Humidity Min 35 %RH
Operating Humidity Max 95 %RH



Comes packaged with

  • 2 plastic rings
  • a screwdriver
Accessories

Resources




Connection


This sensor connects to any device with a Digital Input.

This is how you connect the 3523 to a Phidget board that does not have 12V power such as the 1018, 1012, 1202, and 1203 using our 12VDC Power Supply:

  • Connect the +12 wire from the Power Supply (that's the one with the white line) to the 3523 Brown wire.
  • Connect the 3523 Black wire to a Digital Input on the 1018.
  • Connect the Power supply Ground Wire and the 3523 Blue wire to the Digital Input Ground connector on the 1018.
Connection

Note: When the 3523 is connected to a 1012, it will behave as a Normally Close (NC) sensor instead of Normally Open (NO).

For boards that have power input, if the supplied power is within 12-24VDC, the +V line can be connected to the terminal block, powering the sensor from the Phidget. The 1019, 1073, all accept external power.

Connection

Additional Information

SKU ES000179
Manufacturer Phidgets

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.