3525_0 - Lanbao PR18S-TM10DNO Photoelectric Tripwire Sensor - 10m

Be the first to review this product

Availability: In stock

Regular Price: €51.00

Special Price €48.95

OR

Quick Overview

3525 uses the most reliable and accurate style of photoelectric sensing which is the through beam sensor. This comes with an emitter and a receiver.
3525_0 - Lanbao PR18S-TM10DNO Photoelectric Tripwire Sensor - 10m

More Views

  • 3525_0 - Lanbao PR18S-TM10DNO Photoelectric Tripwire Sensor - 10m

Details

Product Features


Like a tripwire, this sensor detects when an opaque object breaks the beam of IR light between the emitter and receiver.
 
Product Description

The 3525 uses the most reliable and accurate style of photoelectric sensing which is the through beam sensor. The sensor comes with an emitter and a receiver. The emitter provides a constant invisible IR (infrared) beam of light to the receiver and detection occurs when an object passing between the two breaks the beam. The photo detection range of the 3525 is up to 10 meters.

A very familiar application of a through beam photoelectric sensor can be found is right in your home. Quite often, a garage door opener has a through beam photoelectric sensor mounted near the floor, across the width of the door. This sensor is making sure nothing is in the path of the door when it is closing.



Operation


The Phidgets Digital Input is "off" when the receiver receives the transmitter signal (i.e. there are no objects between the transmitter and the receiver); the Digital Input is "on" when the beam is broken by the presence of an object.



Product Specifications


Sensor Properties

Detecting Distance Max 10 m
Sensor Type Through-Beam (Photoelectric)
Sensor Output Switch Type NPN Normally Open
Sensor Response Time Max 3 ms

Electrical Properties

Supply Voltage Min 10 V DC
Supply Voltage Max 30 V DC
Current Consumption Max 15 mA
Protection Circuitry Surge Protection

Physical Properties

Cable Length 2 m
Material PBT
Operating Indicator Green LED (Emitter), Yellow LED (Reciever)
IP Rating IP67
Operating Temperature Min -25 °C
Operating Temperature Max 55 °C
Operating Humidity Min 35 %RH
Operating Humidity Max 85 %RH



Resources


Connection - Emitter

You need to provide 12VDC to the Transmitter. The brown wire is +V and the blue wire is GND.



Connection - Receiver

The receiver connects to any device with a Digital Input.

This is how you connect the 3525 Receiver to a Phidget board that does not have 12V power such as the 1018, 1012, and 1203 using our 12VDC Power Supply:

  • Connect the +12 wire from the Power Supply (that's the one with the white line) to the 3525 Brown wire.
  • Connect the 3525 Black wire to a Digital Input on the 1018.
  • Connect the Power supply Ground Wire and the 3525 Blue wire to the Digital Input Ground connector on the 1018.
Connection

Note: When the 3525 Receiver is connected to a 1012, it will behave as a Normally Closed (NC) sensor instead of Normally Open (NO). You'll also need to use a pull-up resistor when using a 1012. A 1kΩ resistor between the brown and black wires will work.

For boards that have power input, if the supplied power is within 12-24VDC, the +V line can be connected to the terminal block, powering the sensor from the Phidget. The 1019, 1073, all accept external power.

Connection

Additional Information

SKU ES000181
Manufacturer Phidgets

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.