3329_0 - 42STH38 NEMA-17 Bipolar Stepper with 99.51:1 Gearbox

Be the first to review this product

Availability: In stock

€53.95
OR

Quick Overview

This bipolar stepper with a rear shaft and a planetary gearbox has a 0.018° step angle and 48 kg·cm of torque at low speeds.
3329_0 - 42STH38 NEMA-17 Bipolar Stepper with 99.51:1 Gearbox

More Views

  • 3329_0 - 42STH38 NEMA-17 Bipolar Stepper with 99.51:1 Gearbox
  • 3329_0 - 42STH38 NEMA-17 Bipolar Stepper with 99.51:1 Gearbox
  • 3329_0 - 42STH38 NEMA-17 Bipolar Stepper with 99.51:1 Gearbox
  • 3329_0 - 42STH38 NEMA-17 Bipolar Stepper with 99.51:1 Gearbox

Details

Product Features


This bipolar stepper with a rear shaft and a planetary gearbox has a 0.018° step angle and 48 kg·cm of torque at low speeds.
 
Product Description

This NEMA-17 motor has an integrated Planetary gearbox with a 991044/2057 :1 ratio.It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler.

When connected to a 1067 - PhidgetStepper Bipolar HC, the 3329 has a maximum speed of 34 RPM. At the output of the gearbox, the step angle is approximately 0.018°. When using the step angle in calculations, you should derive the exact step angle by dividing 1.8° by the gearbox reduction ratio.

At 1.7 Amps, this gearbox stepper can produce a maximum torque of 250 kg-cm. However, the gearbox is only rated for 48 kg-cm of continuous torque, and 100 kg-cm for brief overloads. Loading this gearbox stepper beyond the torque rating of the gearbox will shorten its useful life.



Motor Controller and Connection


The 3329 stepper motor connects to a bipolar motor controller such as the 1067 - PhidgetStepper Bipolar HC.

The following diagram shows how to connect the motor wires to the board connectors to produce a clockwise rotation in the stepper motor when increasing position. To wire for counter-clockwise rotation when increasing position, reverse the red and blue wires.

Series

Note: Make sure to unplug the power cord from the motor controller before switching wires around.


The rear shaft of this motor can be equipped with the HKT22 Optical Encoder for applications where you need to keep track of the exact position, velocity, or acceleration of the motor.
Connection

Mounting Bracket


The mounting holes on this motor are compatible with the 3338 - Mounting Bracket (NEMA17).

Bracket

Product Specifications

 

Motor Properties

Motor Type Bipolar Stepper
Manufacturer Part Number 42STH38-1684B / 36JXS60K99.51
Step Angle 0.018°
Step Accuracy ± 5 %
Holding Torque 48 kg·cm
Rated Torque 48 kg·cm
Maximum Speed (w/1067 Motor Controller) 34 RPM
Acceleration at Max Speed
(w/1067 Motor Controller)
1.2E+06 1/16 steps/sec²

 

Electrical Properties

Recommended Voltage 12 V DC
Rated Current 1.7 A
Coil Resistance 1.7 Ω
Phase Inductance 3.2 H

 

Physical Properties

Shaft Diameter 8 mm
Rear Shaft Diameter 3.9 mm
Mounting Plate Size NEMA - 17
Weight 564 g
Number of Leads 4
Wire Length 300 mm

 

Gearbox Properties

Gearbox Type Planetary
Gear Ratio 99 10442057 : 1
Backlash Error 1 12°
Maximum Strength of Gears 48 kg·cm
Shaft Maximum Axial Load 49.1 N
Shaft Maximum Radial Load 98.1 N


Warning

 

warning Connecting the motor directly to a power supply will destroy the motor and void the warranty. If you want to check your motor make sure it is connected to a constant current / chopper drive controller.

 

Resources

 

Additional Information

SKU ES001737
Manufacturer Phidgets

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.